There are perhaps as many ways to sharpen tool edges as there are opinions on the matter. In this video, we take a closer look at one of those methods — sharpening with waterstones, a method that consistently receives high ratings among many top artisans. Proponents say that waterstones are fast-cutting, relatively clean (as opposed to oil stones), compact, and generally affordable, qualities that make this sharpening solution worthy of your consideration and in-depth study.

In this video, cabinetmaker and sharpening guru Craig Vandall Stevens takes a closer look at some of the varieties of waterstones available and in use today, including the Shapton, Takenoko, and King brands of stones. For the most part, man-made stones manufactured with either aluminum oxide or ceramic dominate the market, but there are also natural whetstones which remain available for specialized applications. Craig’s interest and expertise in sharpening makes this a unique opportunity to learn more about this art and skill. In this video learn how to flatten and maintain Japanese waterstones using 150 grit sandpaper and a flat-milled machinists’ reference granite. Craig also suggests a useful collection of grits and styles of stones for maximum efficiency and value. And he discusses how natural Japanese quarried stones might fit into the mix. — Keith (8 Minute Woodworking Video)

Whether it’s a circular veneered table apron, a contemporary laminated chair back, or a flowing architectural column, if it’s a curve made with wood it’s most likely created using a process called bent wood lamination. One of the most common ways of pressing and clamping these laminations is to use a vacuum bag system.

In this video, the journeyman cabinetmakers at the Robert Treate Hogg Cabinetmakers give us a complete introduction to this versatile and useful technique. It’s a process they use almost daily. RT Hogg’s president, Michael Hoffmeier describes their method, which centers on the use of specialty 3/8th inch flexible plywood. This remarkable material (also known as wacky wood or bending plywood) can be easily formed into tight curves allowing the artisan almost unlimited design possibilities. First, the core is glued-up, vacuum pressed, and dried. And then the finished veneer is applied. With experience the process is efficient and highly controllable. In this video, learn about proper glue selection, flexible ply construction tips and tricks, vacuum bagging and veneering skills. — Keith (9 Minute Woodworking Video)

Robert Treate Hogg Cabinetmakers (pronounced “Hoge”) hand-make commissioned, limited production furniture, architectural cabinets and fixtures. Originally founded in 1936, Hogg specializes in high-end audio-visual lecterns and podiums for higher education. They are based in Oxford, Pennsylvania.

Warning! Skip this video if you haven’t watched any of my “How to Carve Twists & Spirals” video series featuring Irion Company carver, Brad Ramsay. I say this not to discourage you, because it’s a revelation here to see Brad work his magic. But if you first watch Part 2 or Part 3 (which features real hands-on carving of a “period correct” twist finial) I think you will find this video to be all the more important, interesting and fun.

What impressed me the most while I was filming this segment, was the fact that Brad truly relishes the layout and preparation phase of this project, mostly because it offers him the freedom to re-work and tune things when changes are most easily made. And, it seems to me that there are certain appealing artistic opportunities here too.

In this video, Brad shows us how he breaks it all down — using only a pencil, compass and dividers. There are essentially four steps in the process. First, Brad segments the un-carved pre-turned blank into the equal divisions to match the original (or desired model design). He then draws a smooth 360 twist from the base to the top of the woodturning blank, making sure this line flows gently from top to bottom. Next, he creates additional layout divisions for reference. And then finally, he draws the remaining repeating elements to match the first.

The entire process once seen, is easy to understand. And keep this in mind, this layout method has broader application in any project requiring layout of repeating circular, spiral, or twisting designs in furniture or other wood objects. Not a bad thing to know and stash away in your bag of tricks. — Keith (7 Minute Woodworking Video)

For more in this series watch: Secrets Revealed: How to Rough Carve Twists and Spirals (Part 2 of 3)

The Irion Company specializes in the restoration, conservation, and hand-made reproduction of American antique furniture from the 18th and 19th century. Brad Ramsay is a cabinetmaker and he specializes in period correct carvings.

Don’t miss new videos? Subscribe to my email or RSS feed updates for free.