There is something intoxicating about the process of turning — part by-the-book technical, part a fluid freestyle dance. For flat-work artisans, those of us who make cases and cabinets, it’s easy to see why so many woodworkers are drawn to this fascinating, and some might say hypnotic specialty of the wood world.

On my recent visit to The Irion Company Furniture Makers, I was delighted to meet and learn from Johnathan Sanbuichi, an accomplished cabinetmaker and turner. In this video, Johnathan demonstrates his approach to the turning of flats, beads and coves, the core design elements found on many styles of beds, chairs, tables, and cabinets —— especially 18th and 19th century furniture styles. In this video, Johnathan explains how to use a “story stick” to lay out and create “elevation” guides that mark key points in these types of designs, how to use calipers and a parting tool to rough-in depth cuts on the lathe, and how to work with a skew or spindle gouge. And along the way, we get a few thoughts on Johnathan’s life in woodworking. Now, how’s that for a deal?

I hope you enjoy this informative and mesmerizing little peak into Johnathan’s world of turning. – Keith (7 Minute Woodworking Video)

Johnathan Sanbuichi is a cabinetmaker and turning expert at the The Irion Company, specialists in the restoration, conservation, and hand-made reproduction of American antique furniture from the 18th and 19th century. Irion is based in Christiana, Pennsylvania.

Dimensioning rough boards by breaking them down into smaller, precisely sized parts is one of the key first steps in any woodworking project. This preliminary process certainly isn’t the most glamorous part of working wood, but virtually every skilled artisan will agree it’s one of the key steps for achieving consistent, high-quality results.

In this video, artisan Eric Matson, who is the Director of the University of Rio Grande’s Fine Woodworking Program, walks us through the same eight steps Eric’s students must master early in their college training. Eric explains how even twisted, cupped, bowed or kinked boards can be quickly and safely broken down into smaller rough parts, which can then be milled to tight tolerances and made ready for jointing and other more refined processes. In part one of this two part series, you’ll learn how to rough cut boards to length, rip to rough width, joint one face flat, and plane both faces to thickness. But there’s more to Eric’s approach than just these basic steps. Eric also shows you how to stay organized and mill parts in batches, and why it’s important to prepare extra parts for set-up, testing, and disaster recovery. His entire approach offers you a comprehensive strategy that will help you achieve the tight tolerances essential for master quality work. — Keith (11 Minute Woodworking Video)

Click here for Part Two, the final segment in this series. Watch steps 5 through 8..

Eric Matson is the Director of the Fine Woodworking Program at Rio Grand University. Rio Grande offers a one year certificate program, as well as two year associates and four year college degree programs. Graduates have the skills and knowledge to be productive in custom furniture shops and architectural/cabinet shops. Rio Grande (pronounced rye-oh) is in Southern Ohio.

This video is the second half of a two part series on the quick, easy, repeatable way to prep rough lumber. In Part One, (view Part One here) instructor and furniture maker Eric Matson demonstrates how he breaks down rough boards , step-by-step, into smaller rough parts. Now, in this final segment, Eric takes us through the last steps of squaring edges and cutting to precise lengths & widths. Along the way we learn tips, tricks, and secrets that help eliminate errors.

If you take away anything from this series, I hope you’ll agree that guaranteeing consistent results only comes with a proven system. Eric shows us his system, the same proven method that Eric says quickly elevates his students’ work to the next level. See if it works for you. (10 Minute Woodworking Video – Part 2 of 2)

Eric Matson is the Director of the Fine Woodworking Program at Rio Grand University. Rio Grande offers a one year certificate program, as well as two year associates and four year college degree programs. Graduates have the skills and knowledge to be productive in custom furniture shops and architectural/cabinet shops. Rio Grande (pronounced rye-oh) is in Southern Ohio.