In rough carpentry, deciding how to cut into a board is pretty straight forward — measure to length and chop. But for fine woodworking, slicing up a prized piece of lumber is a more refined skill. In this video, professional cabinetmaker and teacher Eric Matson shows how to evaluate rough lumber prior to cutting. First, he identifies and marks with chalk unusable defects in the stock including knots, checks, and sapwood. Then he decides how cut to the board into rough component pieces for maximum yield and beauty. Part of Eric’s goal is to assure that sectioned boards “wrap” the project (i.e. a piece of furniture) in the same sequence they come off the board. This artful attention to the flow and continuity of the wood’s grain increases the quality of the final project. Grain flow is the core objective, but a complete evaluation also includes identifying highly figured parts of a board, which can be used for focal points (drawer fronts, table tops, etc). And if surplus material remains on the board, Eric makes sure he cuts extra spare parts and “set-up” pieces when possible. — Keith (4 Minute Woodworking Video).

Eric Matson is the Director of the Fine Woodworking Program at Rio Grand University. Rio Grande offers a one year certificate program, as well as two year associates and four year college degree programs. Graduates have the skills and knowledge to be productive in custom furniture shops and architectural/cabinet shops. Rio Grande (pronounced rye-oh) is in Southern Ohio.

Planning your next masterpiece? Great! Now all you need are the perfect boards. For the lucky few, fantastic material will just land on their bench, seemingly from thin air, but for most of us, we’ll need to buy lumber and that means a trek to your favorite lumberyard. For me, it’s often a highlight of the process.

Depending on the project, a local home center might offer exactly what you need, but for those who are more demanding, you may need to find a specialty hardwood lumber supplier to fill your needs. In this video tutorial, fine-hardwood dealer Rick Hearne explains the methods and tricks to buying great wood. Rick explains how lumber is graded, how to size up potential boards, evaluate knots & figure, and how to leave a lumber bin ready for the next buyer. Even experienced hands might enjoy Rick’s no-nonsense tips for navigating the yard. (4.5 Minute Woodworking Video)

Rick Hearne is President of Hearne Hardwoods in Oxford, Pennsylvania

Woodturner and artisan, Mark Damron, explains how he uses CA (cyanoacrylate) glue to repair cracks, inclusions, voids, and knots during the turning process. CA glue is marketed under a variety of names including Krazy Glue and Super Glue. But don’t let this common household status convince you this glue isn’t for serious work. It is.

Mark explains how and when he turns to super-fast drying CA glue to solve problems before they become disasters. He uses CA to stabilize knots and loose bark and natural edges on his work. Mark specializes in lathe turning large and difficult pieces with lots of figure, exactly the kind of wood challenge that demands the use of CA. Mark’s technique includes the use of a CA aerosol spray accelerator, which minimizes drying time and down-time. (2 Minute Video)