Whether it’s a circular veneered table apron, a contemporary laminated chair back, or a flowing architectural column, if it’s a curve made with wood it’s most likely created using a process called bent wood lamination. One of the most common ways of pressing and clamping these laminations is to use a vacuum bag system.

In this video, the journeyman cabinetmakers at the Robert Treate Hogg Cabinetmakers give us a complete introduction to this versatile and useful technique. It’s a process they use almost daily. RT Hogg’s president, Michael Hoffmeier describes their method, which centers on the use of specialty 3/8th inch flexible plywood. This remarkable material (also known as wacky wood or bending plywood) can be easily formed into tight curves allowing the artisan almost unlimited design possibilities. First, the core is glued-up, vacuum pressed, and dried. And then the finished veneer is applied. With experience the process is efficient and highly controllable. In this video, learn about proper glue selection, flexible ply construction tips and tricks, vacuum bagging and veneering skills. — Keith (9 Minute Woodworking Video)

Robert Treate Hogg Cabinetmakers (pronounced “Hoge”) hand-make commissioned, limited production furniture, architectural cabinets and fixtures. Originally founded in 1936, Hogg specializes in high-end audio-visual lecterns and podiums for higher education. They are based in Oxford, Pennsylvania.

During any segmented turning project, clamping a stack of rings together during glue-up is one key step in the process. There are various ways of accomplishing this task. Some craftspeople use a type of press similar to a book binding press (Woodtreks guest artisan, Don Leman, uses a beautiful shop-made press.) Other turners will clamp the glued wood ring-stack assembly directly on their lathe, between the headstock and the tailstock. But toolmaker and woodturner Mark Damron uses another very clever and inexpensive approach.

In this quick video, Marks shows you how to make and use his simple — and cheap — “Rod Clamp”. It might become a real favorite. All you need is a threaded rod, some MDF board, a T-nut, washer, and nut. For less than $10, you can have a first-class clamp that will work for almost any segmented turning or stack ring lamination project. (2 Minute Woodworking Video)

Toolmaking skill allows woodturner Mark Damron to design projects that otherwise might be impossible to create. Mr. Damron is full of surprises. Meet him on the street and you might never guess what really drives him. A big man who speaks plainly, Mr. Damron is a toolmaker and machinist by trade, but working on the lathe is his passion. His toolmaking skills are broad & deep, and that makes Mark somewhat unusual because he relies on these skills for most turning projects he attempts. This allows him to solve problems by building custom tools that meet his needs. Yet there is more to Mark than technical prowess. Mark is also possessed with a driving creative insight, which he is often too modest to acknowledge.

If you spend any time at all with Mark, you quickly conclude that he has his own unique vision. His desire to break from tradition runs irrepressibly deep within him. Mark’s work is a reflection of all of this — and from my perspective, this sure makes him fun to watch. His large-scale, stack ring laminated vessels are but one example. In turning these pieces, Mark depends on several custom tools designed to hold the tight tolerances that are needed to extrude tall, grain-matched vessels from massive turning blanks of highly figured wood. Thin walls, large pieces, and fragile rings combine for some scary turning. But Mark is sure-footed. And in the end, the results are spectacular. (7 Minute Video)