Segmented bowls and vessels are made up of dozens or hundreds of small wooden blocks. Segmented woodturners glue these often very tiny pieces into rings which become part of a stack. The process is exacting and critical. But it’s not hard to get good results if you follow the proper steps. In this quick video tutorial, guest artisan, Don Leman will show you first, how to properly prepare and sand the cut segments and then, how to apply the glue for maximum strength in the joints. You’ll also learn how to maintain perfectly flat glue-ups on each ring and on the entire ring stack. Mr. Leman guides you step-by-step through the process. (10.5 Minute Video)

During any segmented turning project, clamping a stack of rings together during glue-up is one key step in the process. There are various ways of accomplishing this task. Some craftspeople use a type of press similar to a book binding press (Woodtreks guest artisan, Don Leman, uses a beautiful shop-made press.) Other turners will clamp the glued wood ring-stack assembly directly on their lathe, between the headstock and the tailstock. But toolmaker and woodturner Mark Damron uses another very clever and inexpensive approach.

In this quick video, Marks shows you how to make and use his simple — and cheap — “Rod Clamp”. It might become a real favorite. All you need is a threaded rod, some MDF board, a T-nut, washer, and nut. For less than $10, you can have a first-class clamp that will work for almost any segmented turning or stack ring lamination project. (2 Minute Woodworking Video)

Toolmaking skill allows woodturner Mark Damron to design projects that otherwise might be impossible to create. Mr. Damron is full of surprises. Meet him on the street and you might never guess what really drives him. A big man who speaks plainly, Mr. Damron is a toolmaker and machinist by trade, but working on the lathe is his passion. His toolmaking skills are broad & deep, and that makes Mark somewhat unusual because he relies on these skills for most turning projects he attempts. This allows him to solve problems by building custom tools that meet his needs. Yet there is more to Mark than technical prowess. Mark is also possessed with a driving creative insight, which he is often too modest to acknowledge.

If you spend any time at all with Mark, you quickly conclude that he has his own unique vision. His desire to break from tradition runs irrepressibly deep within him. Mark’s work is a reflection of all of this — and from my perspective, this sure makes him fun to watch. His large-scale, stack ring laminated vessels are but one example. In turning these pieces, Mark depends on several custom tools designed to hold the tight tolerances that are needed to extrude tall, grain-matched vessels from massive turning blanks of highly figured wood. Thin walls, large pieces, and fragile rings combine for some scary turning. But Mark is sure-footed. And in the end, the results are spectacular. (7 Minute Video)