Segmented bowls and vessels are made up of dozens or hundreds of small wooden blocks. Segmented woodturners glue these often very tiny pieces into rings which become part of a stack. The process is exacting and critical. But it’s not hard to get good results if you follow the proper steps. In this quick video tutorial, guest artisan, Don Leman will show you first, how to properly prepare and sand the cut segments and then, how to apply the glue for maximum strength in the joints. You’ll also learn how to maintain perfectly flat glue-ups on each ring and on the entire ring stack. Mr. Leman guides you step-by-step through the process. (10.5 Minute Video)